Advanced technological process of stainless Steel Precision casting

Stainless steel precision casting has relative manufacturing technology in the stage of production and manufacturing, and the mold can be effectively made according to various styles of its products in the manufacturing stage.   Stainless steel precision casting can be effectively divided into left and right cavity, effectively using its planing, milling, etching, turning, spark discharge and other comprehensive processing technology to achieve success.

 

The prospect of precision casting industry the specification model and indentation style of stainless steel precision casting are the same as those outside the plate of its products.   in application, the key is because the wax mold is key to industrial production of wax pressing plate application.   therefore, when completing the selection, its melting point is not too high and the hardness test method is not high, in application, the aluminum alloy profile material with relatively cheap price and relatively light quality is used to make carbon steel precision casting mold.

 

Stainless steel precision casting must effectively refine the peripheral capacity of its wax mold during production and processing, and several single wax moulds will be glued to the top of the planned mold after effective grinding and polishing in application.   this material pipe for high wear-resistant iron precision casting is also an industrial wax core digital model produced by wax mold production.

 

Stainless steel precision casting will effectively spread several wax molds on the top of the mold with industrial glue and evenly apply a layer of fine sand, the sand particles are small and very fine, so as to ensure that the surface of the clear hair embryo is as smooth and meticulous as possible.

 

After the stainless steel precision casting is successful in the first sand spraying and of course drying, in the stage of application, industrial glue will be applied again on the surface of the wax mold, and then the second layer of sand will be effectively coated with a second layer of sand.   The particle size is larger and thicker than the previous layer of sand, and after the second layer of sand is coated, the wax mold is allowed to dry under a clear temperature control.

 

After the second sand coating and of course drying, the stainless steel precision casting deduces the third sandblasting treatment, the fourth sandblasting treatment and the fifth sandblasting treatment in turn.   Then effectively according to its volume specifications and surface regulations and net weight and other relativity should be adjusted sandblasting times, in general, sandblasting times is 3-7 times.